01
Emergency Walkthrough
We arrive, walk the structure with you, and identify the fire source, the smoke path and any water from firefighting. We take thermal imaging and moisture readings, photograph everything, and set containment with a negative air machine. This first visit runs 60 to 90 minutes and is when we tell you what is salvageable and what is not.
02
Dry Soot Removal
Before any liquid touches a surface, we HEPA vacuum the ceilings, walls, framing and contents, then wipe with chemical sponges. This stage keeps soot from being pushed into the drywall paper, which is what makes a wall unrecoverable. A typical Cardiff bedroom takes four to six hours; a full first floor takes one to two days.
03
Wet Cleaning and Char Removal
Grease residue, protein smoke and charred framing get a second pass with the right degreaser or char removal chemicals. Where framing is scorched, we use soda blasting media to strip the char back to sound wood without gouging it, then treat the wood with a smoke sealant primer. This is the stage where we decide what gets encapsulated and what gets cut out.
04
Odor Treatment
Once surfaces are clean, we run a thermal fogger through the structure to reach the cavities, then set an ozone generator on a timed cycle with the space sealed and empty. Ozone treatment media and the generator run 8 to 12 hours, and the house needs to air out for a few hours afterward. One treatment clears most jobs; heavy protein smoke sometimes needs a second.
05
Verification and Handoff
We re-read moisture, check the HVAC for smoke odor in the supply air, and walk the house with you room by room before we pull containment. You get the photo log, the moisture readings and the scope in writing. If the job needs drywall or paint, we hand off to the structural crew with the same documentation so nothing gets lost between trades.